>>Ʒ
ϵ
ϵˣ
ֻ15062628442    13912355212
QQ1535456157
ַʡɽɽDZǿ·6
ڿŮʦȫ,ͷBDߵӰ

GWS߹ˮģ¿ƻ
GWS superheated water high-gloss traceless injection mould
ģ¼
Technology of quick rising and drop of mold temperature
ͳעģ¶ȿƵIJ֮
Disadvantages of the traditional temperature control technology for injection molds:
޷߹עп¼ٽµҪ
The need of high-gloss injection molding for quick temperature rising and drop cannot
 be met.
·ȽСƷܽӺֻܵõ޷
The margin of temperature rising is very small. As a result, the welding traces on
product surfaces can be alleviated rather than removed thoroughly.
ڲڿŮʦȫ,ͷBDߵӰӲԽߣԽ˲ôֹգƷӲֻܴﵽHB޷
ʵʹҪ
Due to the great hardness and poor fluidity of plastics, this technology can
only make the surface hardness of a product grade HB, failing to meet the actual
requirements ofapplication.

  • (46)
  • ģʱͣʱֻʹģܲȶ
    Due to the molds expansion when in temperature rising and its shrinkage when in temperature drop, the clamping force is quite unstable.
    ƷսӦȸȱݡ
    Thus, the products are easy to suffer from short molding, scorching, excessive internal stress and other defects.
    ģߵ  
    Configuration of die
    ģڱҪdzߵĹȣȷƷı
    The molds inner surface should be very smooth, so as to ensure high surface quality
    for products.
    ģڲܵȷԿºͽ¡
    The pipelines arranged in the mold must be rational so that temperature can rise or
     drop quickly.
    ģڲĹܵӦõá
    The molds internal pipelines should be of good heat conductivity.
    Ҫͣ¼£ģѡõĸֲҪá
    The necessity to have temperature rise and drop frequently in production makes it
    necessary to select good steel materials for the mold.

  • (14)
  • ֯ṹȣϵС
    The organizational structure is even and the expansion and shrinkage coefficients are
    small.
    ʹùҪ䲻ڿŮʦȫ,ͷBDߵӰıȷ޳
    Pay special attention to the molds mintenance when in use, making it dry and dustless.
    ߹ˮģ¿ƻŵ
    Advantages of the superheated water high-gloss mold temperature controller
    ƷܽߣܽӺۣƣ˿ơ
    Remove the welding wires and traces, ruffles and silver marks on product surfaces.
    ׽ϲƷıˮ
    Solve the surface shrinkage of plastic products completely.
    ߲Ʒȣʹȿɴﵽ档
    Enhance the product surface as smooth as a mirror.
    ƷҪӹ߳Ʒ20-30%
    It is unnecessary to conduct processing after spraying to products, increasing the rate
    of finished products by 20% to 30%.
    ֯Ʒ˦ĸ֯ʹƷʸ
    Solve the float phenomenon of woven products, ensuring better quality.
    ʹڳעԣ߲ƷƷʺǿȡ
    Make thin walls formed, so as to improve the fluidity in injection molding and product quality and strength.
    ʹڳעڿɽ60%ϣǿϵԼЧ
    The injection molding period for the thick wall forming may be reduced by over 60%,
    improving plastics fluidity and filling effect.
    95%ܻա
    95% of heat energy may be recovered.
    100%Ľʻա
    The medium may be recovered completely.
    ӹ¯¿ظ豸ʡԸӵĹ¯豸ѹ豸ȫͻ͹
    ̡
    It is unnecessary to connect it with a boiler or other external auxiliary temperature controlling equipment, avoiding the application of complicated boiler plants (the approval of the safety and environmental protection performance of high-pressure equipment) and pipe works.

  • (43)
  • ȫ¯֮ɻյܺĴ⡣
    Solve the great energy consumption of boilers due to steam cannot be recycled.
    Сʱƶϲ̨ͬʹã180ˮȫ¯IJ
    Due to its small volume, it can be moved conveniently and used with different equipment.
    The hot water of 180 can completely overcome the disadvantage of environmental pollution of boilers.

    ߹ˮģ¿ƻص
    Features of superheated water high-gloss traceless injection mould
    10.4ҺLCDʾѡģʽ룬ȫĽ棬򵥡
    10.4truecolor LCD (optional) with touch-type Chinese character input function, all-Chinese interface and simple operations
    ȫջϵͳ¶ȵļ⣬ģʵʪ¶ȷPLCԲͼ仯ʾȷ׼ȷȶ
    A full-closed loop controls the detection of input temperature and output temperature; the molds actual humidity realizes back locking of PLC; and digital colors are available for varying display, making the output accurate and stable.
    ˮˮ¶ȼѹʱ¶ȶעܻźŻ
    For the six kinds of alarms including high-temperature hot water, cold water, air temperature and pressure, the interlocking between time and temperature movements and the injection molding machines signals is employed.
    ŷԪ
    Components imported from Europe and USA are used.
    ˫·ģ¶ȼ⣨ѡܵ316ֹܣӿڡ
    A one-way or two-way mold (optional) is used for temperature detection; the input pipe and the output pipe are made of 316 stainless steel pipes; and there are multiple groups of I/O interfaces.
    䱸ȡȴڿŮʦȫ,ͷBDߵӰתƹܡ
    The heating, cooling and hot/cold transformation functions are available.
    ˮȴˮĻϵͳЧԡ
    It is designed with recovery systems for high-temperature hot water and cooling water, saving energy significantly.

    ߹ˮģ¿ƻӦ
    Application of superheated water high-gloss traceless injection mould
    Ŀǰڼҵ硢ͨѶƷҽеҵй㷺ӦǰҺӻҺʾʼDZԡֻյҺʾμƺ͹ѧOAAVҵ
    At present, it enjoys extensive application prospects in industries like household electrical appliances, automobiles, communications, articles for daily use, and medical instruments. Particularly, it is widely applied to LCD TV sets, computer LCDs, notebook PCs, mobile phones, air-conditioners, auto LCD, automobile internal ornaments, car lamps, optics, OA and AV instruments, etc.